Short Track Models
Short Track Forums => Bench Racing-general Model Car discussion topics => Topic started by: Maineboy on July 22, 2021, 07:53:22 PM
-
I got a can of this, in blue, to use on my 56 Chevy project. No matter what I do the"metallic" part shows up in the finished paint much more than I like. I have warmed the paint, agitated the can for serval minutes and still the same. The finish I get looks like it has sizable metallic pieces in it that show right up in bright light or sunlight. I am kind of disappointed as the color is just what I wanted. Anyone else had this kind of trouble? Any ideas on how to make it work better?
MB
-
Did you prime the body first? A dark primer might help? But that might alter the blue a little as well. Try using several light coats, but I'm not confident you can do much about the actual metallic. I use Tamiya paints. The metallic is very fine in their paints. Much more to scale.
Tb
-
I bought this paint because it was the color I wanted for the car. I applied it over flat black primer. The color in it is OK but the metallic stands out too much. I used Tamyia lt blue with metallic and that came out nice. Guess I shoulod not use cheap paint.
MB
-
Scale metallic only comes in scale hobby paints and even then the flakes can be too big at times. Glad you got it worked out!
-
Thanks for the responses. I sprayed the paint on a larger flat plastic surface and it looks lots better on that. I painted some wheels with it before I experimented on something else and now have to take the paint off of them. I agree, the metal particles are too big for this to be used on something as small as a model car. The metal flakes tend to be way over obvious on small multi curved surfaces. I was blinded by the color shown on the cap of the can and thought of little else. Think I have found another paint, non-metallic that is very close to the same color. Sprayed that on a flat piece of plastic yesterday and like that much better.
Back to car building when I get the time. This year is crazy, adverse weather conditions in Maine have messed up our hay mowing operations. Never know what I am going to be doing from one day to the next. Winter is better time for model building as I have way more spare time with darkness settling in at 4 instead of 9 at night. Don't get any evening time to work on the models this time of year.
-
Agree on the time aspect. Just got back from about 10 days in Georgia to see my youngest daughter and my four grandchildren. I could not prepare much beforehand because of some work projects so now that I am back, I'm w-a-y behind at work/ with my own grass mowing and spraying/ with my mother's house and that mowing and spraying/ and so on. Time never seems to be on my side these days.