Short Track Models
Short Track Forums => Open Wheel cars-modifieds/sprints => Topic started by: Gary Davis on October 17, 2017, 01:17:33 PM
-
This is a build of the type of car that was allowed to run both classes back when the Supermodified class was first started in N. Calif. The full roll cage was a bolt on to start with. Then they started to make them a permanent fixture and of course added the wings.
This build is of a typical(if there is one) car that ran then...it started life as a GMP kit and of course... things had to be changed. The chevy motor was made into a ford. The cage...wing..dash and gauges where all fabbed. Racing harness was made from 3M Nexcare cloth tape painted blue with a blue sharpie. The nerf bars and side bars are also fabbed out of Aluminum rod. All wired and minor plumbing...Decals are also done in house...Paint is Duplicolor. I weathered this to look like the car just pulled into the pits after mud in and the start of hot laps.
Thanks for looking in and I hope you enjoy....
The engine.....
(https://media.fotki.com/2vzt5GmqxbQd4s.jpg) (http://public.fotki.com/Gary-Davis/118-dirt-super-modified/motor/super-motor-006.html)
(https://media.fotki.com/2vzt5G6jxbQd4s.jpg) (http://public.fotki.com/Gary-Davis/118-dirt-super-modified/motor/super-motor-003.html)
(https://media.fotki.com/2vztyttdxbQd4s.jpg) (http://public.fotki.com/Gary-Davis/118-dirt-super-modified/chassis/mud-7.html)
(https://media.fotki.com/2vztrQJdxbQd4s.jpg) (http://public.fotki.com/Gary-Davis/118-dirt-super-modified/finished-car/outside-shots-009.html)
(https://media.fotki.com/2vztrbuyxbQd4s.jpg) (http://public.fotki.com/Gary-Davis/118-dirt-super-modified/finished-car/outside-shots-030.html)
(https://media.fotki.com/2vztrZqdxbQd4s.jpg) (http://public.fotki.com/Gary-Davis/118-dirt-super-modified/finished-car/outside-shots-001.html)
(https://media.fotki.com/2vztrQPrxbQd4s.jpg) (http://public.fotki.com/Gary-Davis/118-dirt-super-modified/finished-car/outside-shots-022.html)
-
Well done replica type build Gary. All the modifications and decals look great.
I assume that's a 1/18th scale Travis sprint car kit, if so they are very hard to find these days.
Bob
-
Really neat. Great detail!!
Rett
-
wow! Outstanding! Haven't seen this one yet!
-
Oh man that thing is gorgeous!!!!!!!! That engine looks good displayed by itself!!!!!!!
-
Thanks for ALL the great compliments folks....
Well done replica type build Gary. All the modifications and decals look great.
I assume that's a 1/18th scale Travis sprint car kit, if so they are very hard to find these days.
Bob
Hey Bob...Thanks for the great compliment. I'm not familiar with TRAVIS. This is an 1/18 scale kit..and was made by GMP(Georgia Marketing Products)...who are now ACME Diecast. And Yes...this is a very hard to find kit. I built this about 10yrs ago. I bought the kit about 16 yrs ago..from GMP.
-
OH MY!!!!
That is sooooo coooooollllllll, Gary
My mind must be failing me.....don't remember this one.....(hmmmmmm.... :) ;) )
Trevis "built"?
-
Travis Craft sprint cars were built in Ohio by Floyd Travis. His cars were used by many western and central Pa. owners in the late sixties through the seventies. Most of the sprint cars that raced the central Pa. tracks were Travis cars or copies.
I attached a link to the National sprint car hall of fame inducting Floyd Travis. This gives you the history of Travis Craft.
https://www.sprintcarhof.com/FileGet.aspx?ID=249
Bob
-
Hey Bob...thanks for the link. GREAT history there...I've got it saved/downloaded. As you mentioned...A LOT of teams/Drivers used his cars. Now that I have the info on Floyd Trevis...a person could say it was one of his cars...built in Washington...lol
-
Another gem, Gary. A real beaut! Just the right amount of "dirtiness" on there. Great stuff as usual! 8) 8)
-
Thanks Bill!!
-
outstanding build!!
-
Thanks Patrick...
-
reminds me of the champ cars that ran on turkey night at Irwindale speedway(RIP).The Casey Luna Sprinter I ordered is supposed to be Ford powered buy reportedly has a chevy.
-
Hey Pat...did you order the 1/24 Monogram kit? If so...it is a chevy motor. The 1/18 GMP kit does have the same thing going for it too. That's why I changed it over to the ford....just to be different..and the challenge...lol
-
I have a couple AMT nascar ford engines.I am not going to build it as a casey luna car though.It will be decal less,White body and non wing for my 1st one.If I get hooked on these I am in trouble!
-
I have a couple AMT nascar ford engines.I am not going to build it as a casey luna car though.It will be decal less,White body and non wing for my 1st one.If I get hooked on these I am in trouble!
LOL...well..let me WARN ya...they are kinda cool. Wingless and no sponsors sounds like a Local car...way cool. there are a few guys who run the vintage sprintcar circuit up here that have a 430 hp V-6 that they're running. I just talked to him last Saturday at a Model Show in Portland,Or. I want to see these guys run next year. I'm thinking of maybe doing a Replica build of it.
-
I used to live 1mile away from state line and watched(not heard)them run there in post falls!.Before going deaf,you could hear them like they were in the back yard!I loved it!
-
Way cool...They said that that's one of the tracks they run...along with Shasta,Ca....South Sound,Wa...Wenatchee,Wa..Yakima,Wa State line,Id. I'm not sure that's all of them but...I can make at least 2 of those. If I knew what weekend they ran a Shasta...I'd drive down as I grew up 2 miles from that track. Annnd like you...I could hear those bad boys hot lappin after mud-in. Man...does that get the juices going or what!! LOL