Short Track Models
Short Track Forums => Bench Racing-general Model Car discussion topics => Topic started by: Tom Birky on December 22, 2021, 09:22:18 PM
-
Check out this new dirt late model frame! Designed by JMAXX racing, 3D printed by WFC Motorsports and sold exclusively by Ron Coon Resins.
Its printed in gray, very smooth resin. It's a generic frame in 1/25th scale. There are no suspension pieces or any other peripheral parts designed for this chassis as it was designed primarily for diorama use, however I suspect many enterprising builders will be adding their own goodies to trim it out. Very cool piece that sells for $15. Due to high demand, there may be a short delay in obtaining one, but if I know Ron Coon, they'll be doing everything possible to get these out. I think this is a good sign for dirt car builders.
(https://i.ibb.co/ZTDQKdF/20211222-203432.jpg) (https://ibb.co/pXFHZ2M)
(https://i.ibb.co/nRD8d8f/20211222-203501.jpg) (https://ibb.co/mSHFZFt)
(https://i.ibb.co/L86x05z/20211222-203446.jpg) (https://ibb.co/vHm3cYx)
-
Yea, I noticed it on his website yesterday. I've already ordered 4 of 'em!
-
Thank you for your purchase Tom. You're going to lose it when you see what's coming :)
-
........... You're going to lose it when you see what's coming :)
Are you going to post something here or will we have to find out on our own?
-
Whatever it is, I'll make sure it gets posted! Now I have to go shake my piggy bank!
Tb