Short Track Models

Short Track Forums => Bench Racing-general Model Car discussion topics => Topic started by: Tom Birky on October 02, 2021, 09:55:25 PM

Title: Parts Plugs
Post by: Tom Birky on October 02, 2021, 09:55:25 PM

Here's a few little things I've picked up recently that you may find interesting.

New angle tread dirt tire from Ron Coon. I compared it to the popular dirt tire from PPP. it's a bit taller, approximately same width. Nicely cast and doesn't suffer from the concave tread problem on the PPP tire.
(https://i.ibb.co/JRjbSc2/Screenshot-20211002-212027-Samsung-Internet.jpg) (https://ibb.co/mC5YPRt)
(https://i.ibb.co/4tJ11QS/20211002-204541.jpg) (https://ibb.co/kBMmmdD)
(https://i.ibb.co/WkfwWTh/20211002-204854.jpg) (https://ibb.co/K2Wkj1P)

Next is the new hood pin decals from Ron Coon, produced by Dynomite Decals. Very good detail and go on easily. 

(https://i.ibb.co/KFnSCPH/Screenshot-20211002-213211-Samsung-Internet.jpg) (https://ibb.co/gzYhs2C)
(https://i.ibb.co/KzWRgsk/20211002-205115.jpg) (https://ibb.co/5xLt3jy)
(https://i.ibb.co/ySvhJ24/page-banner-1024x468.jpg) (https://ibb.co/Wt8D1CV)

Next is another decal sheet. This is a sheet of pop rivets from Tommy Logan at Speedway Decals. Just what I needed for my late model build!  Speedwaydecals.com
(https://i.ibb.co/KzvnyvT/20211002-204429.jpg) (https://ibb.co/84Zk8Z1)
(https://i.ibb.co/TqtTdSy/20211002-204407.jpg) (https://ibb.co/PzgY0nk)
(https://i.ibb.co/vVQMHxd/Screenshot-20211002-214352-Samsung-Internet.jpg) (https://ibb.co/CmMSz59)

Last is the 3D printed dirt late model nose from  Customdirtcars.com. I believe it's 1/24th scale. I narrowed mine to get it closer to 1/25th. It's fairly rough, but a few coats of Mr Hobby Mr Surfacer smoothed it up pretty well.
(https://i.ibb.co/pbbn6Mx/20211002-205028.jpg) (https://ibb.co/FmmnkyK)

Title: Re: Parts Plugs
Post by: RCR on October 08, 2021, 05:15:22 PM

Thanks for the plug Tom! Ron Coon Resins will also have pop rivets decals by Dynomite Decals available soon as well as a decal package that will consist of a 3 gauge panel, battery disconnect switch, ignition switch, and fuel shut off valve also from Dynomite Decals!  8) 8) 8)

Title: Re: Parts Plugs
Post by: Tom Birky on October 08, 2021, 09:53:18 PM

Looking forward to those additions Ron!

Tom