Author Topic: Parts Plugs  (Read 292 times)

0 Members and 1 Guest are viewing this topic.

Tom Birky

  • Administrator
  • Sr. Member
  • *****
  • Posts: 453
Parts Plugs
« on: October 02, 2021, 09:55:25 PM »
Here's a few little things I've picked up recently that you may find interesting.

New angle tread dirt tire from Ron Coon. I compared it to the popular dirt tire from PPP. it's a bit taller, approximately same width. Nicely cast and doesn't suffer from the concave tread problem on the PPP tire.




Next is the new hood pin decals from Ron Coon, produced by Dynomite Decals. Very good detail and go on easily. 





Next is another decal sheet. This is a sheet of pop rivets from Tommy Logan at Speedway Decals. Just what I needed for my late model build!  Speedwaydecals.com




Last is the 3D printed dirt late model nose from  Customdirtcars.com. I believe it's 1/24th scale. I narrowed mine to get it closer to 1/25th. It's fairly rough, but a few coats of Mr Hobby Mr Surfacer smoothed it up pretty well.



RCR

  • Newbie
  • *
  • Posts: 25
    • Ron Coon Resins
Re: Parts Plugs
« Reply #1 on: October 08, 2021, 05:15:22 PM »
Thanks for the plug Tom! Ron Coon Resins will also have pop rivets decals by Dynomite Decals available soon as well as a decal package that will consist of a 3 gauge panel, battery disconnect switch, ignition switch, and fuel shut off valve also from Dynomite Decals!  8) 8) 8)
« Last Edit: October 08, 2021, 05:31:43 PM by RCR »

Tom Birky

  • Administrator
  • Sr. Member
  • *****
  • Posts: 453
Re: Parts Plugs
« Reply #2 on: October 08, 2021, 09:53:18 PM »
Looking forward to those additions Ron!

Tom