Between 1964 and 1967 CAE cars were very popular on the central Pa. racing circuit. They could be purchased completely built, as a kit or you could just purchase the plans. I thought I would post some of my CAE replica builds here.
I use the Don Edmunds model kits for these builds. They work very well for these, but the frame needs to be lengthened between the front and rear roll cage and between the firewall and the front bumper mount.
I had a how to on Fred's for one of these builds.
THIS IS A JIG I MADE TO LENGTHEN THE FRAME AND KEEP IT STRAIGHT.
The jig is used prior to attaching the front axle.
Hosted on FotkiI BUILT TWO OF THESE, ONE WAS GIVEN TO THE ORIGINAL CAR OWNER, JOHNNY KERNS
Hosted on FotkiTHIS IS JOHNNY KERNS AT MY HOME PICKING UP HIS MODEL
Hosted on FotkiTHIS IS PETE SWARMER FROM 1965 #1
Hosted on FotkiTHE #2 WAS NOT A CAE CAR BUT THE EDMUNDS KIT WORKED WELL FOR THE BUILD>
Hosted on FotkiJ.P. RUSSELL # 10 DRIVEN TO THE PORT ROYAL SPEEDWAY TRACK CHAMPIONSHIP IN 1966 by Pete Swarmer.
Hosted on FotkiThis one just finished. Regester Chevrolet #6 1967 season.
Hosted on FotkiI hope you enjoy looking at these.
Bob