Hey doc,
thanks for your interest in the Mustang.
The paint are rattle cans from the craftshop/home improvement store. In the next bigger city to my home there is a
company, wich sells car paints for body painters and they are able to mix each and every shade of color you like
and fill it in rattle cans, that´s very useful!
Maybe there is something like this in your neighborhood?
The decals are all made on my inkjet printer. I found the #72´s and the Gulf logos at the web and reduced them to proper size.
The decals have at least 4 layers. For each decal i printed three layers on white decal paper, cut the logo thru the middle of the black/blue outline,
then print a final layer on clear decalpaper to get a full and sharp black/blue outline to finish the logo/#s. Tricky work, but it was worth it!
I need at least three layers of white decals to cover the black dividing line on the blue/orange properly.
Even the black dividing line is printed on clear decalpaper, because it´s a lot less and cleaner work than tape and mask the
areas beside the black line.
Then three final coats of clear and it was done.
